Discontinued A3/A4

The following replacement chart of models series have been updated and replaced with new versions. Refer to the current model page for most up-to-date models.

You may use the links to the discontinued models’ product page to reference information such as operating instructions, previous model ranges and specification. Tohnichi continues to support previous models with repair and calibration. Contact our service department for assistance.

DISCONTINUED

CURRENT

DESCRIPTION

A3/A4

Semi-Automatic Airtork

Thumbnail	Name	Short description
	A10N3	Semi-Automatic Airtork, 3-10, 0.1N.m, 3/8" Square Drive Available to Order up to May 17, 2024
	A25N3	Semi-Automatic Airtork, 5-25, 0.25N.m, 3/8" Square Drive Available to Order up to May 17, 2024
	A100M3	Semi-Automatic Airtork, 30-100, 1kgf.cm, 3/8" Square Drive Available to Order up to May 17, 2024
	A250M3	Semi-Automatic Airtork, 50-250, 2.5kgf.cm, 3/8" Square Drive Available to Order up to May 17, 2024
	A90I3-3/8	Semi-Automatic Airtork, 30-90, 1lbf.in, 3/8" Square Drive Available to Order up to May 17, 2024
	A200I3-3/8	Semi-Automatic Airtork, 50-200, 2.5lbf.in, 3/8" Square Drive Available to Order up to May 17, 2024
	ALS10N3	Semi-Automatic Airtork with Limit Switch, 3-10, 0.1N.m, 3/8" Square Drive Available to Order up to May 17, 2024
	ALS25N3	Semi-Automatic Airtork with Limit Switch, 5-25, 0.25N.m, 3/8" Square Drive Available to Order up to May 17, 2024
	ALS100M3	Semi-Automatic Airtork with Limit Switch, 30-100, 1kgf.cm, 3/8" Square Drive Available to Order up to May 17, 2024
	ALS250M3	Semi-Automatic Airtork with Limit Switch, 50-250, 2.5kgf.cm, 3/8" Square Drive Available to Order up to May 17, 2024
	ALS90I3-3/8	Semi-Automatic Airtork with Limit Switch, 30-90, 1lbf.in, 3/8" Square Drive Available to Order up to May 17, 2024
	ALS200I3-3/8	Semi-Automatic Airtork with Limit Switch, 50-200, 2.5lbf.in, 3/8" Square Drive Available to Order up to May 17, 2024

AC3

High Power Semi-Automatic Airtork

CSPD

CSPLD / CSPLDC

Wired Data Transfer Torque Wrench

CTA-P

CTA

CTA2

Digital Torque and Angle Wrench

CTB

CTB2-G

Digital Torque Wrench for ReTightening

CEM2

CEM3

CEM3-G

Data Tork, Torque Wrench for Tightening & Inspection

DB Dial Indicating Torque Wrench

Thumbnail	Name	Short description
	60DB4-S	Dial Indicating Torque Wrench, 6-60, 1kgf.cm, 1/4" Square Drive
	120DB4-S	Dial Indicating Torque Wrench, 10-120, 2kgf.cm, 1/4" Square Drive
	230DB3-1/4-S	Dial Indicating Torque Wrench, 30-250, 5kgf.cm, 1/4" Square Drive
	230DB3-S	Dial Indicating Torque Wrench, 30-250, 5kgf.cm, 3/8" Square Drive
	450DB3-S	Dial Indicating Torque Wrench, 50-500, 5kgf.cm, 3/8" Square Drive
	900DB3-3/8-S	Dial Indicating Torque Wrench, 100-1000, 10kgf.cm, 3/8" Square Drive
	900DB3-S	Dial Indicating Torque Wrench, 100-1000, 10kgf.cm, 1/2" Square Drive
	1800DB3-S	Dial Indicating Torque Wrench, 200-2000, 20kgf.cm, 1/2" Square Drive
	2800DB3-1/2-S	Dial Indicating Torque Wrench, 3-28, 0.5kgf.m, 1/2" Square Drive
	2800DB3-S	Dial Indicating Torque Wrench, 3-28, 0.5kgf.m, 3/4" Square Drive
	4200DB2-S	Dial Indicating Torque Wrench with Metal Handle, 4-42, 0.5kgf.m, 3/4" Square Drive
	DB6N4-S	Dial Indicating Torque Wrench, 0.6-6, 0.1N.m, 1/4" Square Drive
	DB12N4-S	Dial Indicating Torque Wrench, 1-12, 0.2N.m, 1/4" Square Drive
	DB25N-1/4-S	Dial Indicating Torque Wrench, 3-25, 0.5N.m, 1/4" Square Drive Available until stock depleted, then order DB25N5-1/4-S
	DB25N-S	Dial Indicating Torque Wrench, 3-25, 0.5N.m, 3/8" Square Drive DISCONTINUED: Replaced with DB25N5-S
	DB280N-1/2-S	Dial Indicating Torque Wrench, 30-280, 5N.m, 1/2" Square Drive
	DB280N-S	Dial Indicating Torque Wrench, 30-280, 5N.m, 3/4" Square Drive

DECA

DECA2/DECA

Torque Multiplier

DOT (-MD) Analog Torque Wrench Tester

Thumbnail	Name	Short description
	3000DOT-MD
	DOT200F-MD	Torque Wrench Tester with Motor Driven Loader, 20-200, 1lbf.ft
	DOT500F-MD	Torque Wrench Tester with Motor Driven Loader, 50-500, 2lbf.ft
	DOT300I-MD	Torque Wrench Tester with Motor Driven Loader, 50-300, 1lbf.in
	DOT430I-MD	Torque Wrench Tester with Motor Driven Loader, 50-430, 2lbf.in
	DOT1000I-MD	Torque Wrench Tester with Motor Driven Loader, 100-1000, 5lbf.in

DOT(E)-MD

Motor Drive Torque Wrench Tester

DOTE2

DOTE3

DOTE3-G

DOTE4-G (-MD) DOTE3-G

Digital Torque Wrench Tester

FM96MC

FH256MC

Remote Signal Type Torque Wrench

LC2

LC3-G

Line Checker

Thumbnail	Name	Short description
	PH15DX350	Pipe Wrench Head for CSP model only, 15D, Pipe Diameter 13-38 mm Must purchase as wrench combo with head that will not be removeable from the tool
	PH19DX350	Pipe Wrench Head for CSP model only, 19D, Pipe Diameter 13-38 mm Must purchase as wrench combo with head that will not be removeable from the tool
	PH22DX350	Pipe Wrench Head for CSP model only, 22D, Pipe Diameter 13-38 mm Must purchase as wrench combo with head that will not be removeable from the tool
	PH22DX450	Pipe Wrench Head for CSP model only, 22D, Pipe Diameter 26-52 mm Must purchase as wrench combo with head that will not be removeable from the tool

Pipe Wrench Head

QL4

QL / QLE

Ratchet Head Type Adjustable Torque Wrench

RTD

RTD

Rotary Slip Adjustable Torque Screwdriver

Setting Box

Spin Tork

Thumbnail	Name	Short description
	TCR18N	Rotary Type Torque Sensor, 1.8-18N.m, 3/8" Square Drive
	TCR180N	Rotary Type Torque Sensor, 18-180N.m, 1/2" Square Drive
	TCR700N	Rotary Type Torque Sensor, 70-700N.m, 3/4" Square Drive
	TCR1800N	Rotary Type Torque Sensor, 180-1800N.m, 1" Square Drive

Rotary Type Torque Sensor

TDT

TDT2

TDT3-G

Digital Torque Driver Tester

TM Torque Meter

Thumbnail	Name	Short description
	2TM100CN-S	Analog Torque Meter with Memory Pointer, 10-100, 2cN.m, Chuck Diameter 18-190 mm
	2TM150CN-S	Analog Torque Meter with Memory Pointer, 20-150, 2cN.m, Chuck Diameter 18-190 mm
	2TM200CN-S	Analog Torque Meter with Memory Pointer, 30-200, 5cN.m, Chuck Diameter 18-190 mm
	2TM300CN-S	Analog Torque Meter with Memory Pointer, 30-300, 5cN.m, Chuck Diameter 18-190 mm
	2TM400CN-S	Analog Torque Meter with Memory Pointer, 40-400, 5cN.m, Chuck Diameter 18-190 mm
	2TM500CN-S	Analog Torque Meter with Memory Pointer, 50-500, 10cN.m, Chuck Diameter 18-190 mm
	2TM600CN-S	Analog Torque Meter with Memory Pointer, 60-600, 10cN.m, Chuck Diameter 18-190 mm
	2TM750CN-S	Analog Torque Meter with Memory Pointer, 80-750, 10cN.m, Chuck Diameter 18-190 mm
	3-TM1.5-A-S	Analog Torque Meter with Memory Pointer, 0.15-1.3, 0.05lbf.in, Chuck Diameter 14-110 mm
	3TM10CN-S	Analog Torque Meter with Memory Pointer, 1-10, 0.2cN.m, Chuck Diameter 14-110 mm
	3TM15CN-S	Analog Torque Meter with Memory Pointer, 1.5-15, 0.5cN.m, Chuck Diameter 14-110 mm
	3-TM1-A-S	Analog Torque Meter with Memory Pointer, 0.1-0.86, 0.02lbf.in, Chuck Diameter 14-110 mm
	3-TM2.5-A-S	Analog Torque Meter with Memory Pointer, 0.25-2.15, 0.05lbf.in, Chuck Diameter 14-110 mm
	3TM25CN-S	Analog Torque Meter with Memory Pointer, 2.5-25, 0.5cN.m, Chuck Diameter 14-110 mm
	3TM50CN-S	Analog Torque Meter with Memory Pointer, 5-50, 1cN.m, Chuck Diameter 14-110 mm
	3-TM5-A-S	Analog Torque Meter with Memory Pointer, 0.5-4.3, 0.1lbf.in, Chuck Diameter 14-110 mm
	3TM75CN-S	Analog Torque Meter with Memory Pointer, 8-75, 2cN.m, Chuck Diameter 14-110 mm
	3-TM7.5-A-S	Analog Torque Meter with Memory Pointer, 0.8-6.5, 0.2lbf.in, Chuck Diameter 14-110 mm

Digital Torque Meter

Handy Tork, Battery Operated Torque Screwdriver