CEM2
New Version Now Available: CEM3
Microprocessor
controlled torque wrench with digital read-out.
Select proper model according
to unit of measure as following color code :
| S.I. = | Metric = | American = |
Accuracy
±1%+1digit
| Model | Torque Range | Hand force at Max.Torque | Effective Lgth. | Overall Lgth. | Weight approx | Standard Accessories | Interchangeable Heads | ||||||||||||
| S.I. | Metric | American | Min.-Max. | Resolution (1 digit) | |||||||||||||||
| S.I. | Metric | American | S.I. | Metric | American | N | lb. | mm | in. | mm | in. | kg | lb. | ||||||
| CEM9N2 x 8D | 90CEM2 | 90CEM2-A | N.m 1.8-9 |
kgf.cm 18-90 |
in.lbs 16-80 |
N.m 0.01 |
kgf.cm 0.1 |
in.lbs 0.1 |
37 | 8 23/64 | 243 | 9 9/16 | 294 | 11 37/64 | 0.67 | 1 31/64 | QH8D | Quick Battery Charger (QC-1) | (SH,RH,QH,HH) 8D |
| CEM18N2 x 10D | 180CEM2 | 180CEM2-A | 3.6-18 | 36-180 | 36-160 | 0.02 | 0.2 | 0.2 | 71 | 16 1/8 | 252 | 9 59/64 | 296 | 11 21/32 | QH10D | (SH,RH,QH,HH, DH) 10D | |||
| CEM45N2 x 12D | 450CEM2 | 450CEM2-A | 9-45 | 90-450 | 80-400 | 0.05 | 0.5 | 0.5 | 150 | 33 7/8 | 300 | 11 13/16 | 337 | 13 9/32 | 0.74 | 1 5/8 | QH12D | (SH,RH,QH,RQH, HH,DH) 12D | |
| CEM90N2 x 15D | 900CEM2 | 900CEM2-A | 18-90 | 180-900 | 180-800 | 0.1 | 1 | 1 | 237 | 53 11/32 | 380 | 15 | 410 | 16 5/32 | 0.84 | 1 27/32 | QH15D | (SH,RH,QH,RQH, HH,DH,FH) 15D | |
- |
- | 900CEM2-A | - | - | ft.lbs 13-65 | - | - | ft.lbs 0.1 | - | - | - | - | |||||||
| CEM180N2 x 19D | 1800CEM2 | 1800CEM2-A | 36-180 | 360-1800 | 26-130 | 0.2 | 2 | 0.2 | 391 | 86 1/16 | 460 | 18 1/8 | 477 | 18 25/32 | 1.1 | 2 7/16 | QH19D | (SH,RH,QH,RQH, HH,DH,FH) 19D | |
| CEM360N2 x 22D | 3600CEM2 | 3600CEM2-A | 72-360 | 720-3600 | 52-260 | 0.4 | 4 | 0.4 | 500 | 109 13/16 | 720 | 28 13/32 | 720 | 28 11/32 | 1.6 | 3 17/32 | QH22D | (SH,RH,QH,RQH, HH,DH,FH) 22D | |
| CEM500N2 x 22D | 5000CEM2 | 5000CEM2-A | 100-500 | kgf.m 10-50 |
72-360 | 1 | kgf.m 0.1 |
1 | 550 | 120 5/8 | 910 | 35 13/16 | 907 | 35 27/32 | 4.0 | 8 27/32 | |||
| CEM850N2 x 32D | 8500CEM2 | 8500CEM2-A | 170-850 | 17-85 | 124-620 | 617 | 137 9/64 | 1378 | 54 1/4 | 1351 | 53 3/16 | 5.5 | 12 1/8 | QH32D | (SH,RH,QH) 32D | ||||
1. Overall length does not include
interchangeable head.
2. PH type interchangeable head is not available for this model.
3. FM data transfer type is available upon request.
4. For customized data file software, please contact Tohnichi sales office.
| DATA MEMORY | 99 Data |
| ARITHMETIC FUNCTION | Sampling, Maximum, Minimum, Means |
| MEASUREMENT MODE | PEAK/RUN |
| DATA OUTPUT | RS232C I/F, Infrared ray (Change by dip switch) |
| ZERO ADJUSTMENT | Auto zero function (C key) |
| OTHER FUNCTION | Auto power off (after 3 min.) |
| POWER SOURCE | Ni-Cd Battery |
| CONTINUOUS USE [h] | 8 |
| BATTERY CHANGE [h] | 1 |
| OPERATING CONDITIONS | Temperature 0 ~ 40 |
